Avantone Active Mixcubes Buttercream (Pair)
While originally inspired by the 5C sound cubes from decades ago, the Avantone MixCubes have become the industry standard in studios around the world and have become the #1 best selling speaker of its type in history.
Application:
Active Recording / Mixdown Monitors
Engineering Objective:
The Avantone Active Mixcubes are designed to be high-resolution, full-range powered mini-reference monitors for fixed or remote locations.
The secondary engineering facet was to create a timeless design that compliments a single full-range transducer.
Performance Objective:
Studios primarily use 2-way & 3-way larger monitors designed to represent a wide range reference viewpoint at higher listening levels. However, in this newly developing age of High Definition Audio, there is still a need to also hear what your mix will sound like when played back over small “bass-challenged” systems such as televisions, clock radios, computers, car stereos, iPod docking stations, etc. It is important to make mixing judgments based partially on listening to reference monitors that will not impart tonal anomalies caused by crossovers or inferior full range drivers. Particular attention is always paid to the critical mid-range vocal/guitar/keyboard areas. This is where having a full-range monitor without a crossover is truly revealing. Ten months of R&D comparative listening & tweaking went into the voicing of the AVANTONE MixCubes. The result is a very smooth sounding, full range upgrade from the original 5C Sound Cubes. Listening tests reveal that the MixCubes have a smooth, more open, transparent top end response with extended bass while maintaining their basic original character.
Cabinet Design:
The original 5C Sound Cubes™ were made of ½” particleboard covered with a glue-on wood grain contact paper. We chose to use thicker, denser MDF board because of its high rigidity and inherent low-resonance characteristics. We started with a 165mm (6 1/2") sealed cube design with radiused edges. We then chose an elegant Polyurethane high gloss “RETRO-CREAM” finish. The originals had either screws or on later models plastic binding posts mounted on a recessed plastic cup. We upgraded to high-end nickel plated, machined solid metal binding posts (Dual banana spacing) mounted on a black anodized ,milled and silk-screened aluminum terminal plate. Next we added a 7mm thick neoprene pad embedded into the base of the cabinet to serve as a skid-resistant acoustic isolator. Additionally, for creative mounting situations, we recessed an industry standard 5/8”-27 mic stand mount into the base.
Driver Design:
The originals were a basic 5” stamped frame design. We designed a proprietary 5.25” die cast aluminum frame driver/cone assembly to exceed the performance of the originals. The mounting bezel is then polished for an elegant appearance. The paper cone, chosen for its musical character, is custom designed & crafted using the finest New Zealand pulp with mica fibers added for lighter weight & rigidity. The cloth surround is made in Japan to exacting uniform thickness tolerances. The Top Plate and T-Yoke of driver are made of Sumitomo 1008 low carbon steel enabling the highest modeled flux density in the gap. The magnets are Y- 40 GRADE (MIL-SPEC) yielding a 43oz. High Power-low distortion motor structure.
Amplifier Design:
We designed the amp module from the ground up to be a true professional-grade amplifier. It incorporates “overkill” concepts in component selection as well as safety. The result is a “no-compromise” amp with robust headroom characteristics that will rival the performance of much higher priced studio rack mount amps.
System Type: Active (Self-powered) shielded full-range stereo pair
Frequency Response: 90Hz - 17,000Hz (useful musical range)
Impendance: Nominal 8 ohms
Max SPL: 104db @ 1 meter = 1%THD (PINK NOISE)
Amplifier Type: Class A/B
Amplifier Power: 60 watts RMS@ .005% THD (1KHz)
Amp Frequency Response: 22Hz-50KHz +0dB/- 3dB (90Hz-50KHz +/-0dB)
Noise: S/N -113 dB
Sensitivity: 0dBu (.775VRMS) input at maximum volume (+6dB) = 104dB SPL
Driver: Proprietary design 5.25" cast aluminum frame / paper cone / shielded
Cabinet: sealed / 18mm MDF / Dacron acoustical stuffing
Inputs: XLR & TRS (COMBO JACK) +4/Balanced and -10 unbalanced
Weight: 7.13lbs (per monitor)
Dimensions: 6.5" x 6.5" x 6.5"
Chicago Music Exchange
Payment Terms - Orders Internet orders may be paid for using the following methods: VISA, MasterCard, American Express, Discover, and PayPal. For phone or mail orders you may pay money orders and cashier's checks by mail. Just call us at 773-525-7773 to place your order. All non-credit-card orders are subject to a 10-business-day hold. We do not accept international credit card or PayPal payments from international accounts. For international security reasons, please call the store to arrange a Bank Wire: +01-773-525-7773.
Shipping Charges - Taxes and Title Separate charges for shipping and handling will be shown on your order form. As a security precaution, initial orders and orders shipping to alternate addresses may be held for extended verification. We reserve the right to make partial shipments, which will not relieve you of your obligation to pay for the remaining deliveries. All items purchased from Chicago Music Exchange are made pursuant to a shipment contract. This means that the risk of loss and title for such items passes to you upon our delivery to the carrier. The published rates are for US domestic shipping only. Contact us directly if you wish to place an international order. For more information on our shipping policies, including rates, delivery times, and delays, please visit our website at chicagomusicexchange or call us at: 773-525-7773. If applicable, a separate charge for taxes will be shown on the invoice. We are required to collect sales tax on all orders shipped to Illinois.
3-Day / 15-day Return Policy If you are not completely satisfied with any product, return it for a full refund of the product purchase price, full credit, or exchange of your choice. We give you 3 days from the shipping date on Vintage instruments, and 15 days on New instruments. Credit card returns are issued a credit for purchase price. Refunds are made for product value only, excluding shipping and handling charges. New, Unopened items: You may return most NEW, untouched, unopened items within 15 days of delivery for a full refund. if the return is a result of our error (you received an incorrect or defective item, etc.) we'll also pay the return shipping costs. AmEx credit cards: Note that if your order was paid using an AmEx card we may pass on a 3.5% fee of the purchase price to process your refund. Vintage, Used items: We have to evaluate vintage and used guitars, amps, and other items on a case by case basis. We spend a lot of time with you and the item before your purchase to try to avoid any surprises after your purchase. AmEx credit cards: Note that if your order was paid using an AmEx card we may pass on a 3.5% fee of the purchase price to process your refund. You should expect to receive your refund within four weeks of giving your package to the return shipper, however, we strive to issue your refund sooner. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days). Send your return to: Chicago Music Exchange 3316 N Lincoln Ave Chicago, IL 60657 The following items are returnable only if defective OR unopened or unused: strings, harmonicas, microphones, cleaners, polishes, and polishing cloths. Software/soundware, cassettes, CDs, DVDs, and videos may be returned for credit only if they are in their original, sealed packaging. If defective, these items will only be exchanged for the same product. For complete details on our guarantees, shipping, and return policies, please contact our Customer Service Department at 773-525-7773; fax us at 773-525-2775; visit our website at www.chicagomusicexchange.com, or write us at Chicago Music Exchange, 3316 N. Lincoln Ave, Chicago, IL 60657.