The Carol-Ann Tucana 3r is the new cathode biased, lower wattage version of the flagship Tucana 3!
The Tucana 3r was created to satisfy the desire to have a massively full featured Tucana 3 in a lower wattage, softer responding, configuration.
As the flagship amp in the Carol-Ann line, the Tucana was created to be extremely versatile and cover many styles and genres of music for session and gigging guitar players, as well as home enthusiasts. With the three channel architecture, Alan Phillips designed this amp to cover tones ranging from super clean to higher gain levels, yet still retain full note definition and separation even with complex chord passages, all while maintaining an ultra-quiet noise floor. Not at all an easy task!
The first new feature of this amp are the separate Input Level Controls for the Clean and OD channels. This gives much greater flexibility than any of the previous models. It is possible to set the Clean Channel for a little more crunch or for maximum clean headroom. The overdrive range can be set very easily with the OD Input Level to suit the playing styles or musical genre from a range of blues through rock to modern high gain styles.
The Tucana 3 also comes with Alan's new upgraded 5 Button Foot Controller that allows instant, one action channel changing from any channel to another. The system also features a programmable FX loop switching system that allows you to program the foot controller to a) Switch Manually via the foot switch, b) Switch in when just CHA is selected, c) Switch in when CHB or CHC are selected or d)Switched in when the Lead Master. Programming it is as easy as it gets! The foot controller attaches to the amp via a standard 3 Pin XLR-XLR Mic cable (any length works, BTW), making replacement at shows very easy if a problem arises.
For the power section of the Tucana 3r, Alan chose to utilize a pair of KT88's running at 40 watts ensuring a long, reliable tube life. The transformer set has also been designed to retain a ton of warmth, as well as a tightness in the low end that has not been previously seen in the Tucana series.
The Tucana 3 is very forgiving on speaker choice and works well with many speaker/cab combinations.
The power amp section runs the KT88s at a moderate 75W ensuring very long tube life. The transformer set has been designed to retain a ton of warmth, a tightness in the low end that has not been previously seen in the Tucana series.
Other specs include:
KT-88 Power tubes 40 watts CH A Input Level: This sets the overall input gain for the clean Channel. CH B/C Input Level: This sets the overall input gain for the Overdrive Channels. CH A Bass, Middle & Treble: Clean Channel Tone Controls. CH B/C Bass, Middle & Treble: OD Channel Tone Controls. CH B Gain: Overdrive Channel B gain control. CH C Gain: Overdrive Channel C gain control. CH A Master: Master Volume for Clean Channel. CH B Master : Master Volume for OD Channel. CH C Master : Master Volume for Gain Boost. Lead Master: Lead Master Volume Presence: Global Presence Control. Footswitch Socket: Heavy duty 3 pin XLR connector for footswitch. Foot Controller: CH A, CH B, CH C , EFX Loop Switch with 4 programmable modes of operation, Lead Master with LED's Efx Send and Return Jacks Efx Send Level Control 160501
For more information about the Carol Ann Tucana 3r, please contact us.