Jackson Audio Golden Boy Transparent Overdrive
The Golden Boy Transparent Overdrive (designed in collaboration with Joey Landreth) is the most versatile and transparent overdrive ever made.
Rich in harmonic detail and overflowing with headroom, the Golden Boy redefines the concept of transparent overdrive and brings it up to date with modern features never before seen in an overdrive pedal.
Keep reading to learn more about what the Golden Boy can do for your tone!
The GOLDEN BOY is a very flexible overdrive with 4 presets for clipping options, an innovative gain adjustment feature that we call GAIN CYCLE, and a 3 band active EQ for maximum tonal flexibility. To top it off, we added a boost circuit which is the same type of MOSFET boost circuit found on our top selling PRISM Preamp pedal.
BOOST OVERVIEW
The boost circuit is in its own true bypass loop which means it can be used independently of the DRIVE circuit. The boost circuit in the GOLDEN BOY is a MOSFET based boost much like the AMP MODE found in our best selling PRISM Preamp pedal. To activate/deactivate the boost circuit simply press the BOOST footswitch.
One of the things that makes the boost in the GOLDEN BOY different from other boosts on the market is that it has 4 presets available. Each preset is EQ’d slightly differently to allow it to alter how it interacts with the overdrive circuit in the GOLDEN BOY or any other pedal you may have in your rig.
OVERDRIVE OVERVIEW
The Golden Boy is based on the Bluesbreaker/King of Tone circuit, so the resulting tone is very open, uncompressed and transparent sounding. Think John Mayer overdriven tones. The Golden Boy sits in the mix perfectly and while it adds overdrive and grit, your guitar still sounds like your guitar!
Where the Golden Boy differs from other Bluesbreaker type circuits is that it has the ability to run much higher gain and instantly switch to a low gain transparent overdrive with a tap of the footswitches. With four gain settings at your feet while you play, you can use the GOLDEN BOY as an always on tone shaper, a low gain transparent overdrive, a mid gain drive or a high gain solo drive all without bending down to adjust settings! With the GOLDEN BOY, you keep playing and use your foot (or MIDI) to adjust the gain for you!
CLIPPING DIODE PRESETS
The GOLDEN BOY allows for 4 different presets of clipping diodes which themselves drastically alter the tone and feel of the way the overdrive clips and distorts.
To select a clipping preset, press and hold the DRIVE footswitch for more than 1 second and the clipping program mode will become active. When in this mode, the DRIVE led will flash to indicate that you are in program mode. A quick tap on the DRIVE footswitch will cycle the clipping presets and you’ll be able to hear these presets change as you cycle through them, assuming that the drive circuit was active when the clipping program mode was entered. Once you arrive at a clipping preset that you want to use, press and hold the DRIVE footswitch for more than 1 second and clipping program mode will exit.
Changing clipping diodes are a great way to radically change how an overdrive pedal sounds and feels but oftentimes the change that you perceive has more to do with a change in volume than an actual change in tone….until now!
When we were designing the GOLDEN BOY we knew we wanted to give the overdrive section a lot of tonal flexibility and most importantly make that flexibility useful on stage. So when changing clipping diodes we included circuitry that level matches the output of the pedal as various clipping diodes are selected. So now you can select between all four clipping options, your volume level will remain constant. More importantly, the difference that you hear between the clipping modes will be because of the difference in how those clipping diodes sound and not because your volume is jumping all over the place as it does with other designs.
GAIN CYCLE
The most exciting feature of the GOLDEN BOY is the new feature that we developed called GAIN CYCLE. GAIN CYCLE takes the GAIN knob setting, which selects your maximum gain, and divides that level of gain into 4 equal parts. Say for instance you have your GAIN knob set at the maximum setting or in other words, 100% gain. Every time you press both footswitches simultaneously, the gain of the pedal will jump up 25% until you get to 100%. The following press after 100% will cause the gain cycle to start again at 25%.
3-BAND ACTIVE EQ
To top it off, the DRIVE circuit of the GOLDEN BOY has a 3 band active EQ. The EQ circuit features a studio grade EQ that gives tremendous tonal flexibility to the GOLDEN BOY. Based on the legendary Baxandall EQ that is featured in countless studio EQ’s, the GOLDEN BOY EQ takes this circuit and tailors it for guitarists! We spent tons of time on this EQ dialing it in so it would hit all the frequencies that guitarists need to adjust, and then sweetened it by removing the ear fatiguing highs and lows that can appear at extreme settings.
MIDI CHANNEL
By default, the GOLDEN BOY ships with MIDI Channel 1 being the selected channel. This can be changed by pressing and holding the DRIVE footswitch while applying power to the GOLDEN BOY. Press the BOOST footswitch to increment the MIDI channel number.
You’ll notice that as you continue to hold the DRIVE footswitch, the BOOST LED will flash to indicate which MIDI channel you have selected. IE – 7 flashes = MIDI Channel 7. After the LED flashes, we inserted a 2-second pause so you could tell when the LED was finished flashing. The LED will continue flashing as long as you are holding down the DRIVE footswitch. Once you have selected the MIDI channel you want and have verified it by counting the flashes, simply release the DRIVE footswitch and the pedal will save this MIDI Channel to the internal EEPROM on the microprocessor and reboot.
Input Impedance: 1M
Output Impedance: 100k
Power Supply: DC
Voltage Input: 9V MAX
Polarity: Center Negative
Max. Current Consumption: 100mA
Dimensions: 2.7” x 4.875″
Payment Terms - Orders Internet orders may be paid for using the following methods: VISA, MasterCard, American Express, Discover, and PayPal. For phone or mail orders you may pay money orders and cashier's checks by mail. Just call us at 773-525-7773 to place your order. All non-credit-card orders are subject to a 10-business-day hold. We do not accept international credit card or PayPal payments from international accounts. For international security reasons, please call the store to arrange a Bank Wire: +01-773-525-7773.
Shipping Charges - Taxes and Title Separate charges for shipping and handling will be shown on your order form. As a security precaution, initial orders and orders shipping to alternate addresses may be held for extended verification. We reserve the right to make partial shipments, which will not relieve you of your obligation to pay for the remaining deliveries. All items purchased from Chicago Music Exchange are made pursuant to a shipment contract. This means that the risk of loss and title for such items passes to you upon our delivery to the carrier. The published rates are for US domestic shipping only. Contact us directly if you wish to place an international order. For more information on our shipping policies, including rates, delivery times, and delays, please visit our website at chicagomusicexchange or call us at: 773-525-7773. If applicable, a separate charge for taxes will be shown on the invoice. We are required to collect sales tax on all orders shipped to Illinois.
3-Day / 15-day Return Policy If you are not completely satisfied with any product, return it for a full refund of the product purchase price, full credit, or exchange of your choice. We give you 3 days from the shipping date on Vintage instruments, and 15 days on New instruments. Credit card returns are issued a credit for purchase price. Refunds are made for product value only, excluding shipping and handling charges. New, Unopened items: You may return most NEW, untouched, unopened items within 15 days of delivery for a full refund. if the return is a result of our error (you received an incorrect or defective item, etc.) we'll also pay the return shipping costs. AmEx credit cards: Note that if your order was paid using an AmEx card we may pass on a 3.5% fee of the purchase price to process your refund. Vintage, Used items: We have to evaluate vintage and used guitars, amps, and other items on a case by case basis. We spend a lot of time with you and the item before your purchase to try to avoid any surprises after your purchase. AmEx credit cards: Note that if your order was paid using an AmEx card we may pass on a 3.5% fee of the purchase price to process your refund. You should expect to receive your refund within four weeks of giving your package to the return shipper, however, we strive to issue your refund sooner. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days). Send your return to: Chicago Music Exchange 3316 N Lincoln Ave Chicago, IL 60657 The following items are returnable only if defective OR unopened or unused: strings, harmonicas, microphones, cleaners, polishes, and polishing cloths. Software/soundware, cassettes, CDs, DVDs, and videos may be returned for credit only if they are in their original, sealed packaging. If defective, these items will only be exchanged for the same product. For complete details on our guarantees, shipping, and return policies, please contact our Customer Service Department at 773-525-7773; fax us at 773-525-2775; visit our website at www.chicagomusicexchange.com, or write us at Chicago Music Exchange, 3316 N. Lincoln Ave, Chicago, IL 60657.