D-18 made in 1960

Martin / 1960 D-18

Along with the D-28, the "D-18" continues to be loved by people.
Since its introduction in 1931, this model has been loved by legends such as Elvis Presley, Kurt Cobain, and Eric Clapton.
The Gibson J-45, which has the same mahogany body, has a completely different character from the Gibson J-18.

The one introduced here is a D-18 made in 1960.

The production was low at that time, with only 195 pieces of D-18 alone. This was a time when production had not yet reached its peak. Skilled craftsmen must have spent a lot of time on the production.

And now, 65 years after its production, it has taken on an imposing appearance.
This is the vintage! The dignified appearance of this piece, however technologically advanced it may be today, is a true testament to the quality of the craftsmanship of the craftsmen who made it.NewThe dignified appearance of this vintage cannot be reproduced in any other way, no matter how advanced technology may be today.

The original tortoiseshell pickguard is still in place and gives off a great atmosphere.

The pegs are equipped with waffle backs. If you look closely, you can see the hole for the knob shaft on the cover.

The black and suggestive texture of the Hakaranda used for the fingerboard and bridge is irresistible.

And the sound is the best of all.
The popularity of the 60's Martin goes without saying, but this one has an exquisite mahogany sound that matches the expected appearance of a guitar that has been played to the fullest.

I was surprised at the mellowness and colorfulness of the sound after playing a single chord.

At the moment of attack, I heard a "bang" and a "pop"! The whole body shakes, not just the strings, as if the strings are popping.
You can tell that the body continues to tremble until the reverberation disappears.
The core of the sound is also solid, with a massive bass sound and power that does not lose to strong picking.
This is one that inspires the player with stroke after stroke.

[Specs/included case]
BRACING：Non Scalloped X-Bracing
TOP：Spruce
BACK/SIDES: Mahogany
NECK: Mahogany
FINGERBOARD: Brazilian Rosewood
BRIDGE: Brazilian Rosewood
SCALE: 648mm
NUT-WIDTH: 42.5mm
CASE: Martin 1980s Hard Shell Case

[Condition]
- Neck is in straight condition, no chatter or clogging.
- String height at the 12th fret: 2.3mm on the 6th string side, 1.8mm on the 1st string side.
- Saddle protrusion: approx. 3mm - 4mm
- There is a crack repair on the lower left side of the pick guard (glued/reinforced)
- There is one crack repair on the upper part of the body back and three crack repairs on the lower part (glued/reinforced/refinished and the surface has been carefully finished.)
- There is a strap pin attached.
- There is an extension of the endpin section and replacement of the pin.
- Fret/nut/saddle/bridge pin replacement
- Bridge plate veneer reinforced

[No warranty]

[Warranty]
This is a consignment item and does not come with our warranty.
Of course, after purchase, we will consult with you about adjustments, repairs, etc. (for a fee) if you wish.
The mail-order trial service is not applicable. (No returns).