Description

Two Notes Torpedo Reload

Description:

Torpedo Reload: Guitar Connectivity...Perfected!

Manufacturer Description:

Two Notes Audio Engineering, creator of the world’s best speaker cabinet simulation, has bridged a new technological gap with the Torpedo Reload, your new high-end device for silent playing and reamplification. 

The Reload is the ideal combination of the devices you must have in a modern studio for the recording of electric guitars and basses: a power attenuator, a multi-impedance loadbox, a DI and re-amping box – it does it all and does it perfectly too.

The Two Notes philosophy stands in one word, transparency. The tone must come from your guitar, your amp and cabinet – not from the electronics that we put between parts of your regular setup.

RE-ACT: Reactive-Active Attenuator

Attenuators are usually known for the negative impact they have on your tone in cases of heavy attenuation. On the contrary, the Reactive-Active technology presents your amplifier with a consistent speaker’s impedance no matter what level of attenuation you’re at, and thus preserves the specific character of your amplifier. With a choice of 4, 8, or 16 Ohms, your amplifier (up to 150W RMS) will actually see real speaker impedance, and your tone will remain constant throughout the continuous attenuation curve.

Transparency is the key.

The result of years of research, the RE-ACTTM technology (Reactive-Active Attenuator) will tame your amplifier without ever betraying it.

From 0dB attenuation to total silencing, you can nonetheless choose between absolute transparency to more vintage or modern tone coloring with the CONTOUR.

HI-Z DI Box

Plug your guitar into the DI Input and send that signal to your recorder. At that stage what you want is clarity and Two Notes preserves your guitar’s tone, as you will certainly want to re-inject it into your amp through the REPLAYTM.

REPLAY

One of the most interesting options in studios nowadays: play the guitar one day, and mike the amp (or many different amps) another. The Torpedo Reload is your re-amplifying device of choice. The most difficult part in re-amplification techniques is finding the output level on the DAW that matches the level of your guitar when it is directly connected to the amplifier.

MATCH function

This Two Notes innovation is the solution to the problem of level adjustment when re-amplifying. MATCHTM compares the signal as it comes from the guitar (plugged to the DI input) with the signal that has been recorded (and which is sent to the REPLAYTM Line Input) so that what you send the amp is the ideal level only. Now you can be sure that the signal you send from the DAW is exactly what your guitar itself would be sending.

Plug your guitar into the DI Input and send this signal to your recorder. Later on, you can re-send that signal to your amplifier by using re-amping techniques with the Reload‘s REPLAYTM function. To make it perfect, Two Notes has developed the unique MATCHTM function – THE solution to the problem of level adjustment when re-amplifying.

One Device to Rule Them All?

Record your guitar using the DI, send the signal back to your amp using the REPLAYTM, drive your amp the way it should be driven and lower the level or simply make it silent with RE-ACTTM, record the signal from the loadbox, and even use your own microphone and cabinet for a 3rd take – all simultaneously!

The Torpedo Reload comes with the Wall of Sound III plug-in and your first 24 speaker cabinets: in conjunction with the Torpedo Reload and your beloved guitar or bass amplifier, the WoS III plug-in will achieve absolutely true-to-life studio miking of your amp.

Choose the cabinet and microphone; place the mic in your virtual studio to find the “sweet spot”, and enjoy all of the Torpedo features, including power-amp simulation, 3rd-party IR compatibility, and the possibility of mixing up to 100 different cabs within a single plug-in instance.

Sound Pure
Durham, NC
3:29 PM
10am-6pm EST Monday-Friday and 11am-5pm Saturday