No sales tax for customers outside California.
This Whirlwind Selector A/B Box is in excellent condition - it has seen little use.
The only A,B A+B switch with patented noiseless optical switching.
Functions as a 2 to 1 or 1 to 2 switch.
Operates with 9V battery.
The famous Whirlwind Selector is the only A/B A+B box that provides totally noiseless switching between channels. Send one guitar to two amps or use it the other way around to select between two guitars into one amp. Whichever way you use it, the Selector is the best channel-switching device money can buy.
The Selector can be powered by either a 9-Volt battery or DC adapter. Older models have a 3.5 TS power jack (tip positive) and use DC adapter T401-ND. To insert a battery, simply remove the 4 screws from the bottom of the unit and clip a 9-volt alkaline type battery to the battery clip. Replace the bottom and screws.
On the Selector are three 1/4” jacks, one 2.1mm DC jack (center negative), two LEDs and two footswitches as outlined below.
I/O PORT
A 1/4” jack that should be used for input from a musical instrument when the unit is being used as a 1-in, 2-out device, or as an output to an amplifier when the unit is being used as a 2-in, 1-out device.
A and B
1/4” jacks that should be used as outputs to an amplifier when the unit is being used as a 1-in, 2-out device or as inputs from musical instruments when the unit is being used as a 2-in, 1-out device.
A/B (Switch)
When pressed, toggles the I/O port between “A” and “B”.
BOTH (Switch)
When pressed, engages the A and B channels simultaneously. When pressed again the selection returns to the channel indicated by the flashing LED. The BOTH feature is not recommended when using 2-in, 1-out connections.
LEDs
Indicates which jack is selected for output or input. When the BOTH feature is engaged, one LED flashes and one is fully on. Toggling the A/B switch will alternate which LED is flashing to indicate the channel that will be active when the BOTH feature is turned off.
Shipping policy:
Shipments will require signature on delivery, no exceptions. If there is damage, the buyer must retain all packing materials intact and picture them immediately and send them to sales@maharsvintageguitars.com. Less than 1% of our shipments are damaged in transit, and we are committed to making sure your item arrives safely, but we are taking these additional measures to make sure you are happy with your purchase.
Buyer to pay prior to shipment via Paypal, wire transfer, credit card or other electronic means. Payment must clear before shipping. Certified checks and trades are accepted, however checks must clear before we will ship and trades must be received here and evaluated prior to shipment of our item.
All orders ship within three business days of the receipt of an order, usually faster. Tracking information will be automatically forwarded to all buyers. Buyers must retain all shipping materials in the event a return is necessary.
Returns accepted if the purchaser responds within 48 hours of receipt of an item and there is a discrepancy relating to the condition or originality of an item. Returns are not accepted for items that do not meet the needs or sonic tastes of clients due to the subjective nature, unless such concern is stated prior to the purchase. Any return for reasons other than incorrect advertising of condition or originality on the part of Mahar's Vintage Guitars shall be the responsibility of the buyer, which shall result in the buyer paying all shipping costs (to and from) their location.