Shure PSM 200 In-Ear Personal Monitoring System

Offered for sale;

Used Shure PSM 200 In-Ear Personal Monitoring System.

This monitor system is in very good condition, fully functional, showing just a little playing time.

Shure states:

In-ear personal monitoring system contains Shure SE215 Earphones, a P2R Receiver, and a P2T Transmixer. Features include a built-in audio limiter, 2 mic/line input channels for mix control, and volume control on the bodypack receiver.

P2R Hybrid Bodypack Receiver

The P2R Hybrid Bodypack Receiver is the world's first bodypack receiver to function as a wired receiver, a wireless receiver, or both at the same time. This and other unique features, along with excellent sound quality, make the P2R an exceptional value.

P2T Wireless TransMixer

The P2T Wireless TransMixer is another breakthrough design for personal monitoring. It allows the user to connect two line-level or mic-level inputs directly into the transmitter. The two signals can then be mixed independently. You can connect microphones or instruments directly to the inputs or use line outputs from a mixing console. In short, no matter what the output device, you can probably plug it into the TransMixer.

SE215 Earphones

Featuring a Dynamic MicroDriver, the SE215 delivers detailed sound with enhanced bass. A detachable cable with formable wire enables easy replacement and a secure, comfortable fit onstage or on-the-go. Sound Isolating sleeves in multiple sizes provide up to 37 dB of isolation and a customized fit. Evolved from personal monitor technology that's been road-tested by pro musicians, the SE215 offers detailed sound for personal listening or professional monitoring.

“We test every used item when we buy it and bring it up to our standards before we offer it for sale. Then we burn it in for an hour or so before we ship so that there are no surprises.”

Features

P2R Hybrid Bodypack Receiver

Operates as a wired or wireless bodypack, or both simultaneously

Frequency locator

Built-in headphone limiter

Integrated cable management

High-impact plastic chassis

1/4" Line input jack with high/low gain switch

P2T Wireless TransMixer

Built-in audio limiter

Front mounted antenna

Two mic/line input channels for mix control

1/2 Rack space

SE215 Earphones

Detailed sound with enhanced bass

sound isolating design

Unmatched personalization and comfort

Single dynamic microdriver

Detachable cable with wireform fit

Includes fit kit with sound isolating sleeves

Comes with soft-zip carrying case

Specifications

P2R Hybrid Bodypack Receiver

Operating Controls: Volume knob, Frequency select

LED Indicators: Power, RF reception, Frequency, Limiter, Low battery

RF Sensitivity: -109 dBm typical

Squelch Threshold: -102 dBm typical

Antenna: Attached Whip

Audio Input Connector: Connector Type: 1/4-inch Mono

Impedance: 1 megohm

Maximum Input Level: LO = +0 dBu; HI = 10 dBu

Frequency Response: 30 Hz to 20 kHz (+/-3 dB); earphone dependent

Power Requirements: 9 V alkaline battery, Duracell type MN1604 recommended

Battery Life: Volume Dependent

• Wired (RF Off): 6 hours

• Wireless (RF On): 4 hours

Audio Output Connector: 1/8 inch (3.5 mm)

Minimum Load Impedance: 8 ohms

Net Weight: 100 g (3.52 oz.), less battery

Overall Dimensions: 122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)

P2T Wireless TransMixer

LED Indicators: Tri-color input level, Frequency

Operating Controls: Input level control, Frequency select

Inputs: Two Mic/line, XLR-1/4 in. combo input channels

Outputs: Two XLR split outputs

RF Output Power: 30 mW (+15 dBm) typical conducted (country dependent)

Modulation Limiter: Internal peak limiter (>10:1 hard knee compression)

Antenna: 1/4 Wavelength, semi-rigid, PCB Mount

P2T Audio Input:

Connector Type: XLR-1/4-inch combo

Configuration: electronically balanced

Actual Impedance: 1 kilohm

Nominal Input Level: 25 dBu @ 1/2 volume (12 o'clock)

Maximum Input Level: 5 dBu @ 1/2 volume (12 o'clock)

Pin Assignments:

• XLR: 2=hot; 3=cold, 1=ground

• 1/4: Tip = hot, Ring = cold, Sleeve=ground

Phantom Power Protection: Yes: Up to 52 VDC

Current: 170 mA maximum

Dimensions: 220 mm x 140 mm x 40 mm (8.6 in. x 5.6 in. x 1.7 in.)

Net Weight: 370 g (13 oz.)

P2T Audio Outputs:

Passive connection parallel with input: Connector Type: XLR

Configuration: electronically balanced

Pin Assignments: 2 = hot ; 3 = cold, 1 = ground

Phantom Power Protection Yes: Up to 52 Vdc

Power Requirements

Operating voltage 12-18 VDC

SE215 Earphones

Speaker Type: Single Dynamic MicroDriver

Sensitivity (1kHz): 107 dB SPL/mW

Impedance (1kHz): 20 Î

Noise Attenuation: Up to 37 dB

Frequency Range: 22Hz - 17.5kHz

Input Connector: Gold-plated 3.5 mm (1/8")

Cable: 64" Detachable (at ear) with wireform fit

*Please note: we do our best giving descriptions of used pieces. We have found it impossible to describe every mark on an instrument or amp that is not in the "mint" category. Also, what's important to you may not be important to someone else. For example, you may say, "I don't care what it looks like as long as it plays or sounds well." Another person may say, "Body cosmetics are very important to me so tell me about every scratch, nick and blemish." So, please ask the questions that are most important to you. If you ask they will be answered. They are free and there's no limit. Additional photos can also be made available.

This is a specific item that is also being offered for sale in our brick & mortar location. It is possible that it has just been sold. Please ask if it is still available before purchasing.

*It is our policy to require a signature on delivery of all musical instruments. Please let us know if you prefer no signature required when ordering or we will automatically require a signature.

If you prefer your item to be sent without a required signature Imperial Guitar and the selected carrier can no longer be responsible for the security of the package once it has been delivered.