Fox Guitars - Pickguards
Paul Fox
Online Only
11:21 AM

Found 30 matches

Fox Guitars Epiphone Epsilon E Logo for 1949 or after pickguards

$16.95
New Epiphone guitar pickguard "Epsilon" E logo. Black & chrome raised plastic with peel & stick adhesive backing. 1 1/4" x 1 1/4" which is correct size for any Epiphone pickguard made after 1949. Picture of pickguard logo shown on vintage Epiphone pickguard is just for reference only.
See More >>

Centerstream The Other Brands of Gibson - Autographed

$29.95
**BUY AN AUTOGRAPHED COPY DIRECTLY FROM THE AUTHOR** From 1925 through 1961 Gibson, Inc. of Kalamazoo, Michigan produced over 40 brands of musical instruments that did not carry the Gibson name. Many of these brands may be familiar with such names as Kalamazoo, Recording King, National and Washburn, while many others are names that only a handful of avid Gibsonites will know like Werlein...
See More >>

Fox Guitars Gibson A or F mandolin pickguard kit tortoise w/ hardware

$69.95
Brand new hand-made pickguard kit for c1924 or after Gibson A and F style mandolins. Pickguard will fit Gibson mandolin models A, A-1, A-2, A-2z, A-4, A-0 & A-00. Will not fit F-5 or or wide-body A-50 or A-1. It will also fit post-WWII 10 1/4" wide A-style mandolins. This is made from solid tortoise shell material. High gloss finish. Complete kit comes with pickguard, pre-attached fingerboard...
See More >>

Fox Guitars Gibson L-00 white acoustic guitar pickguard

$19.95
New hand-made white replacement pickguard for Gibson L-0 and L-00 acoustic guitars. Made from very thin .03" thick matte white plastic and comes with 3M adhesive transfer tape backing, so all you have to do is peel and stick it on your guitar. Designed to fit the standard Gibson 30s era flat-top guitars with 4" diameter sound hole and 3-ply rosette (sound hole rings) Has 4 3/4" diameter soundhole...
See More >>

Fox Guitars Gibson Kalamazoo Recording King Cromwell guitar pickguard

$49.95
New hand-made replacement pickguard for Gibson-made 16" archtop guitars. Gibson used this particular design on many off-brand archtop guitars including the Cromwell, Old Kraftsman, FDH Special, Capital, Recording King and others. It will fit pretty much any 16" or 17" archtop guitar. Pickguard is made from a translucent tortoise shell material with ivory binding around edges. High gloss finish....
See More >>

Fox Guitars Gibson Kalamazoo KG-31 guitar pickguard tortoise w/ binding

$49.95
New hand-made replacement pickguard for Gibson-made 16" archtop guitars. Gibson used this particular design for many off-brand archtop guitars like the Kalamazoo KG-31, KG-32, KG-22 and KGN-32, as well as many guitars made for Montgomery Ward like the Recording King archtops. Gibson also used this design for obscure brands like Washburn & Ambassador and it will fit pretty much any 16" or 17"...
See More >>

Fox Guitars Epiphone Triumph Broadway pickguard tortoise w/ binding

$64.95
Brand new hand-made replacement pickguard for Epiphone Broadway or Triumph arch-top guitar for 1934 - 1949. This is made from solid faux tortoise shell material with single white binding around the edge. High gloss finish. Note: Holes for mounting not drilled in pickguard since exact hole location will vary from guitar to guitar and model to model. Pickguard shown on a vintage Epiphone Triumph is...
See More >>

Fox Guitars Epiphone Texan guitar pickguard tortoise shell w/ Epsilon E

$44.95
New 100% real celluloid tortoise shell replacement pickguard for a 1960s era Gibson-made Epiphone Texan flat-top acoustic guitar. Made from .05" thick celluloid and comes with 3M adhesive transfer tape backing, so all you have to do is peel and stick it on your guitar. Smooth beveled edges and a high gloss finish. Has period-correct black & chrome raised Epsilon E logo. Will also fit Epiphone...
See More >>

Fox Guitars Gibson L-7 guitar pickguard tortoise w/ cream binding

$64.95
New hand-made replacement pickguard for a Gibson L-7 and post-WWII L-50 arch-top guitars. This is made from solid faux tortoise shell material with a single thick cream binding around the edges. High gloss finish. This pickguard can be used on both the 16" and 17" wide Giibson arch-tops. Dimensions: 9 3/4" along the straight side. Overall: 10 1/4" long X 3 3/4" wide. Note: Holes for mounting not...
See More >>

Fox Guitars Gibson A-5 mandolin pickguard kit with bracket 5-ply

$79.95
Brand new hand-made replacement pickguard kit for a Gibson A-5 "Jethro Burns Model" c1950s to 60s. It is made from 5-ply black/white/black/white/black plastic material. High gloss finish. Complete kit comes with pickguard, pre-attached fingerboard mounting pins and chrome support bracket with threaded plastic mounting block. Also comes with complete installation instructions. All you will need is...
See More >>

Fox Guitars Gibson J-45 flat-top guitar pickguard celluloid

$39.95
New 100% real celluloid tortoise shell pickguard for a Gibson J-45, LG-1, LG-2, LG-3 (will fit all models). It will also fit the 50s era SJ, CF-100 and J-50 (up to approx. 1955). After 1955, the SJ, J-50, LG-1,2&3, and J-45 got another shaped pickguard (see my other auction). These are made from .03" thick celluloid and comes with 3M adhesive transfer tape backing, so all you have to do is peel...
See More >>

Fox Guitars Gibson A or F mandolin pickguard kit w/ hardware 1917-24

$89.95
Brand new hand-made replacement pickguard kit for c1917 - 1924 Gibson A and F style mandolins. Around 1917, Gibson changed their mandolin pickguard design. It is slightly wider than the earlier mandolin pickguards and does not have the hook-tail that went around the bridge (see my other auction) Pickguard will fit all c1917-1924 Gibson mandolins like the A, A-2, A-4, F-2 and F-4, but not the...
See More >>

Fox Guitars Gibson Advanced L-5 archtop guitar pickguard tortoise shell

$69.95
Brand new hand-made replacement pickguard for a 1935 or after Gibson 17" wide Advanced L-5 arch-top guitar (non-cutaway). This is made from solid faux tortoise shell material with 5-ply white/black/white/black/white binding around the edge. High gloss finish. Will also fit any 17" wide arch-top guitar like the L-10 or L-12. Pickguard measures 10" along straight side. Overall dimensions: 10 1/2"...
See More >>

Fox Guitars Gibson L-50 archtop guitar pickguard tortoise shell

$44.95
Brand new hand-made replacement pickguard for Gibson L-50 and L-48 arch-top guitars. This is made from solid faux tortoise shell material. High gloss finish including polished edges. This will fit any 16" wide Gibson arch-top guitar including the L-50 and L-48. Pickguard is reversible so it can be used on a left-handed guitar also. Pickguard measures 9 7/8" along straight side. Overall...
See More >>

Fox Guitars Gibson Firestripe Guitar Pickguard L-00 J-35 AJ

$39.95
Brand new orange firestripe replacement guitar pickguard for Gibson L-00, HG-00, L-1, L-C, J-35 and Advanced Jumbo acoustic guitars. Made from .035" thick custom-colored opaque plastic material. It is not translucent. Comes with 3M adhesive transfer tape backing, so all you have to do is peel and stick it on your guitar. Designed to fit the standard Gibson 30s era flat-top guitars with 4"...
See More >>

Fox Guitars Gibson Kalamazoo Orange Firestripe Guitar Pickguard KG-11

$34.95
Brand new orange firestripe replacement guitar pickguard for Gibson-made Kalamazoo models KG-11, KG-14, KG-12, and KGN-12. Made from .035" thick custom-colored opaque plastic material. Comes with 3M adhesive transfer tape backing, so all you have to do is peel and stick it on your guitar. Designed to fit standard 1930s and 40s Gibson-made brands including Kalamazoo, Grinnell, or any other models...
See More >>

Fox Guitars Gibson J-50 J-45 Batwing guitar pickguard celluloid tortoise

$44.95
New 100% real celluloid tortoise shell replacement pickguard for a circa mid-1950s to 1960s Gibson Jumbo flat-top guitars J-45 and J-50, (SJ) Southererner Jumbo and SJN. This pickguard is commonly referred to as the "batwing" pickguard. Made from .04" thick celluloid and comes with 3M adhesive transfer tape backing, so all you have to do is peel and stick it on your guitar. Glossy finish with...
See More >>

Fox Guitars Gibson LG-1-2-3 B-25 B-45 guitar pickguard celluloid tortois

$44.95
New 100% real celluloid tortoise shell replacement pickguard for a circa mid-1950s to 1960s Gibson LG-0, LG-1, LG-2, LG-3, B-25, B-25-12 and B-45-12. Made from .04" thick celluloid and comes with 3M adhesive transfer tape backing, so all you have to do is peel and stick it on your guitar. Dimensions: 9 3/4" x 4". Glossy finish with slightly beveled edges. Gibson also used this size pickguard on...
See More >>

Fox Guitars Gibson F-5 mandolin pickguard kit tortoise binding

$89.95
Brand new hand-made replacement pickguard kit for a Gibson F-5 mandolin. Starting in the 1950s, Gibson went to a slightly smaller and more pointy-shaped F-5 pickguard design. They used this design up until the late 1970s. For all F-5s made from 1923 to WWII, see my other auction. This pickguard will also fit most F-5 copies like Collings, Weber, Kentucky, Loar, Eastman, etc. This is made from...
See More >>

Fox Guitars Gibson L-12 L-10 pickguard tortoise w/ 3-ply binding

Call
Brand new hand-made replacement pickguard for a Gibson L-12 or L-10 arch-top guitar. This is solid tortoise shell material with 3-ply white/black/white binding around the edges. High gloss finish. This pickguard can be used on both the 16" and 17" L-10 or the 17" Advanced L-12. Dimensions: 9 3/4" along the straqight side and 10 1/4" long X 3 3/4" wide overall. Note: Holes for mounting not drilled...
See More >>

Fox Guitars Gibson Super 400 pickguard pearloid 5-ply bindiing

$64.95
Brand new hand-made replacement pickguard for a Gibson Super 400 non-cutaway arch-top guitar. It is made from a very special and hard to find brown pearloid or marbleized plastic material (just like the original) with 5-ply white/black/white/black/white binding around the edges. High gloss finish. Note: Holes for mounting not drilled in pickguard since exact hole location will vary from guitar to...
See More >>

Fox Guitars Gibson L-5P archtop guitar pickguard tortoise

Call
Brand new hand-made replacement pickguard for a Gibson L-5P and Super 400C cutaway arch-top guitars. This is the larger pickguard Gibson used in the late 30s through the early 50s and measures 8" along the straight side. It will also fit any 17" or 18" wide Gibson cutaway archtop like the L-5C, but if you are replacing an existing pickguard, be sure to measure yours because Gibson went to smaller...
See More >>

Fox Guitars Epiphone Emperor Deluxe pickguard tortoise

$69.95
Brand new hand-made replacement pickguard for Epiphone Emperor or DeLuxe arch-top guitar for 1932 - 1949. This is made from solid faux tortoise shell material with 3-ply white/black/white binding around the edge. High gloss finish. The tortoise is a very close match to what Epiphone used originally. Pickguard measures 10 1/4" along straight side. Overall dimensions: 11 5/8" long X 4" wide. Note:...
See More >>

Fox Guitars Gibson L-5C cutaway archtop guitar pickguard tortoise shell

$69.95
Brand new hand-made replacement pickguard for a Gibson L-5C cutaway arch-top guitars. This is the smaller pickguard Gibson started using in the 1950s and measures 7 1/2" along the straight side.Overall dimensions: 7 3/4" x 3 7/8". It will also fit other cutaway arch-top top guitars, but if you are replacing an existing pickguard, be sure to measure yours because Gibson also used a larger 8"...
See More >>

Fox Guitars Gibson L-7C archtop guitar pickguard tortoise

$64.95
Brand new hand-made replacement pickguard for a 1950s era Gibson L-7C or L-4C cutaway arch-top guitar. It will also fit other 16" or 17" Gibson cut-away archtop guitars like the L-7P and L-12P. This is solid tortoise shell material with 3-ply white/black/white binding around the edges. High gloss finish. Note: Holes for mounting not drilled in pickguard since exact hole location will vary from...
See More >>

Fox Guitars Epiphone Century Electric pickguard tortoise w/ E logo

$49.95
One new hand-made replacement pickguard for a c1949-1950s Epiphone Century Electric archtop with a single New York style pickup. Made from heavy-duty acrylic orange tortoise shell material, gloss finish with polished edges, and period-correct black and chrome Epsilon "E" logo pre-attached. Note: Holes for mounting not drilled in pickguard since exact hole location will vary from guitar to guitar...
See More >>

Fox Guitars Epiphone archtop guitar pickguard Olympic Zenith Blackstone

$29.95
New hand-made replacement pickguard for Epiphone arch-top guitar models Olympic, Blackstone, Zenith and Spartan for 1935-1949. All of these models used the same standard black pickguard. High gloss finish including polished edges. Pickguard is reversible so it can be used on a left-handed guitar also. Pickguard measures 9 1/4" along straight side x 3 1/8" wide. Note: Holes for mounting are not...
See More >>

Fox Guitars Gibson F-5 mandolin pickguard kit tortoise shell 3-ply bind

$89.95
Brand new hand-made replacement pickguard kit for a Gibson F-5 mandolin. Pickguard will fit all F-5s from 1923 or after. Will also fit most F-5 copies like Collings, Weber, Kentucky, Loar, Eastman, etc. Not correct type of pickguard for 1930s era F-7, F-10 or F-12. Gibson used a different pickguard design for F-5s in the 1950s till the 1970s, but this one is correct for the post-WWII F-12. This...
See More >>

Fox Guitars Gibson L-5 Archtop Guitar Pickguard 1930-34

$64.95
One brand new hand-made replacement pickguard for a c1930-1934 Gibson L-5 arch-top guitar. This is solid faux tortoise shell material with 3-ply white/black/white binding around the edge. High gloss finish. This is the longer L-5 pickguard Gibson started using on the 16" models around 1930, and extends from where the neck joins the body at the 14th fret to the bridge. Note: Holes for mounting not...
See More >>

Fox Guitars Gibson L-5 Archtop Guitar Pickguard 1924-1929

$64.95
New hand-made replacement pickguard for a 1924-1929 Gibson L-5 arch-top guitar. This is solid faux tortoise shell material with 3-ply white/black/white binding around the edge. High gloss finish. This is the shorter L-5 pickguard Gibson used on the early 16" models and extends from the 16th fret to the bridge. Note: Holes for mounting not drilled in pickguard since exact hole location will vary...
See More >>