Death By Audio Rooms

Rooms from Death By Audio is a multi function digital reverb with tons of great tones and options to dial in huge ambient sounds! From DBA: ROOMS is a stereo, multi-function digital reverb capable of searing volume, gated walls of sound, and long, trailing reverberant ambiances with an intuitive array of controls designed with live mood-bending in mind. ROOMS was designed to the highest standards of flexibility and audio fidelity. A studio-quality mixer section provides independent DRY and FX controls over six meticulously programmed reverb algorithms; ROOM, DIGIT, PEAK, GATE, WAVE, and GONG. Each different verb is capable of a universe of sounds, and ROOMS is here to help you explore them. ROOMS' creative I/O switching and dual-mono dry signal lines allow for a wealth of possible mono and stereo configurations, making it easy to route signals for parallel processing or stereo amplifier setups. Specs: FREQ: Controls the frequency parameter of the current mode. DEPTH: Controls the depth parameter of the current mode. TIME: Controls the reverb time in all modes. DRY: Controls the volume of the dry signal, from -inf to 20x gain. FX: Controls the volume of the reverb signal, from -inf to 20x gain. ALT: Engages the ALT mode, switching between two sets of controls. When active, FREQ is controlled with the F knob, DEPTH with the D knob, and TIME with the T knob. Additionally, the ALT mode turns on expression control of either FREQ or TIME using the F<->T Switch on the side of the pedal. NOTE: Expression control ONLY works in ALT mode and when an expression pedal is plugged in. Dimensions: 5.95" x 3.86" x 2.96" (including hardware). Weight: 18 oz. Power: 80 mA, 9V (runs on a standard 2.1 mm negative center 9V adapter). Expression Pedal: Almost any expression pedal will work with ROOMS. When not plugged in, the controls work as normal. NOTE: Expression control ONLY controls the F or T knobs when ALT mode is engaged and when an expression pedal is plugged in.