Found 212 matches

Dell'Arte Selmer style Ebony bridge #3 size

$45
This a modern reproduction of a 1930s Selmer guitar bridge, made of fine polished ebony. The straight untouched top edge is angled for overall string compensation. The bottom of the bridge is radiused for a better fit to modern Selmer copies. This bridge is 5-1/16″ long and 9/16″ wide. (128mm long and 14mm wide) The height for #3 is 15/16" (23.8mm across) # 1 and #2 available, see my other...
See More >>

Dell'Arte Ebony mustaches Selmer style

$38.50
Set of two Mustaches Selmer style for Gypsy style guitars. Ebony. US handmade. Also available in Rosewood, check my other postings. For cost of shipping to foreign countries please email me
See More >>

Dell'Arte Rosewood Mustaches Selmer style

$38.50
Set of two Mustaches Selmer style for Gypsy style guitars. East Indian Rosewood. US handmade. Also available in Ebony, check my other postings. For cost of shipping to foreign countries please email me
See More >>

Dell'Arte Miller Miller tuners 220 2005

$330
Made in Switzerland by Rainer Muller to the most exacting specifications. Rainer uses the Schaller gears in his tuners, 1/14 ratio. Great looking tuners of high quality for Selmer-Maccaferri type guitars Be aware that these tuners using the Schaller gears, the outside holes on the headstock need to be resized to 10mm (the inside hole stays the same) Not a difficult task, I have done it with with...
See More >>

Dell'Arte Miller Galalith Tortoise tuner knobs

$21
One set of 6 Knobs replacement for Miller tuners, gorgeous Galalith Tortoise. Made in Switzerland For international shipping please email me for a quote. PS: get a matching tailpiece insert or a whole tailpiece as shown on the last picture.
See More >>

Dell'Arte Miller RM brass tailpiece

$130
Rainer Mueller makes the highest gauge brass tailpiece you can find!! Very handsome design with low nickel post to accept either loop or ball end strings. The Galalith Amber insert is gorgeous, very classy! (you can also buy tuner knobs in the same material) guarantee to damper ANY overtones!! This one is sporting the new RM logo
See More >>

Dell'Arte Gold bracket for archtop tailpiece

$65
This handsome Art Deco bracket is to be used on a wood tailpiece of your design (or a commercial one). Made of very heavy gauge brass (1.70mm) it is then nickel plated AND 24K gold plated. Shown here with a Dell'Arte Mandocello ebony tailpiece that is not for sale.
See More >>

Dell'Arte Bracket for archtop tailpiece

$60
This handsome Art Deco bracket is to be used on a wood tailpiece of your design (or a commercial one). Made of very heavy gauge (1.70mm) nickel plated brass Shown here with a Dell'Arte Mandocello ebony tailpiece that is not for sale.
See More >>

Dell'Arte Altamira Selmer type Ebony Bridge and Mustaches

$50
High quality Ebony bridge for Selmer Maccaferri type guitars. Sold with ebony mustaches Please email me for international shipping
See More >>

Dell'Arte Pau Rosa tailpiece insert

$39
Diamond cut Pau Rosa Dell'Arte insert for tailpiece.
See More >>

Dell'Arte Ebony insert for tailpiece

$39
Diamond cut Dell'Arte Ebony insert for tailpiece
See More >>

Dell'Arte Miller Amber Galalith insert for tailpiece

$47
Truly gorgeous Amber Galalith insert for tailpiece. I've included a picture of a tailpiece with one of these inserts, your Gypsy guitar will never be the same!
See More >>

Dell'Arte Miller Tortoise Galalith insert for tailpiece

$47
Gorgeous Tortoise Galalith insert for guitar tailpiece
See More >>

Dell'Arte Hand bound 5 plys Nitro Celluloid pickguard

$100
We had designed this pickguard for our Swing 42 model (F style Di Mauro model) but it will fit any archtop guitar Gorgeous Tortoise nitro Celluloid!!! This type of pickguard usually goes for close to $200. Dimensions: L: 200mm (the straight edge) Largest width: 80mm (the rounded part) Width: 50mm (the middle point) Width: 20mm (before the top point) Thickness 3.17mm
See More >>

Dell'Arte Miller Brass Tenor Guitar tailpiece

$145
Not many quality choices around if you want to build a tenor guitar! This Miller tailpiece is of the highest quality. Heavy gauge brass, Galalith Tortoise insert, green leather. This thing is expensive but gorgeous! I'll swap the insert for an Amber, Ebony, Rosewood or Cocobolo insert on demand, no extra charge
See More >>

Dell'Arte Akkord Equalizer H-710W

$25
*****************************Old new stock******************************* Equalizer to be mounted on the shoulder of a guitar. I have twelve brand new one of these, any guitar maker interested in the lot, I will give a good deal 5-band active equalizer with volume controller and mounted on different location as H-710W. - S/N Ratio : 70dB(at 1KHz) - Frequency Range : 20Hz~20KHz(-3dB) -...
See More >>

Dell'Arte GOTOH Vintage Kluson for slotted peghead

$45
I'm listing as "mint" but they are brand new (just dusty) never mounted on a guitar. Sold with the screws and 12 gold bushings. A steal! ($58.95 at StewMac no screws, no bushings) For slotted peghead, perfect for a Selmer/Maccaferri type guitar (all the early Dell'Arte were mounted with these) also good if you own a guitar with weird spacing for the tuning heads (35mm standard) You get an extra...
See More >>

Dell'Arte Selmer Maccaferri type rosette 2000

$25
Wood and fiber rosette for Gypsy style petite bouche guitar. I've got 5 of these that can be had for $100 I'll pay shipping. If you buy the 5 I'll add 4 D hole Maccaferri rosettes for free. These were factory seconds with defects that can be fixed. This deal ONLY if you buy 5
See More >>

Dell'Arte STIMER Yves Guen ST-51 2021

$450
Finally, thanks to Christian Yves Guen, the re-issue of the legendary Stimer ST-51 is here!! Created in 1951by Yves Guen under the brand name Stimer, this pickup was first used by Django Reinhardt and became popular among the Manouche jazz players such as Maurice Ferre (aka Gros Chien) Joseph Pouville (aka Babagne) Paul Tchan Tchou Vidal, Patrick Saussois and scores of others. This pickup is...
See More >>

Dell'Arte Walnut neck for short scale Selmer/Maccaferri

$75
Beautiful Black Walnut guitar neck for Selmer/Maccaferri type guitar. Ebony face plate with an engraved Mother of Pearl Dell'Arte logo (you don't want to build a Dell'Arte guitar just sand it off) Truss rod channel pre-cut. Pre drilled for tuners. Keep in mind this neck is for a scale D hole12 frets to the body. By short scale I mean 25 1/2" or 650mm. My other posting offer tuners, tailpieces,...
See More >>

Dell'Arte Maple neck for long scale Selmer/Maccaferi

$75
Beautiful Maple guitar neck for Selmer/Maccaferri type guitar. Ebony face plate with an engraved gold Manouche Latcho Drom logo (you don't want to build a Dell'Arte guitar just sand it off) Truss rod channel pre-cut. Pre drilled for tuners. Keep in mind this neck is either for a long scale Oval hole or a D hole hole 14 frets to the body. By long scale I mean 26 1/2" or 670mm. My other posting...
See More >>

Dell'Arte Carlos CS Sensor CS

$250
Specially engineered carbon housing isolates the pickup element for a linear frequency response and true reproduction of your performance. Requires no external power or preamp for operation. Can be mounted internally or externally. Quick-detach carbon fiber jack plate included. -Extra soundboard adhesive included -External jack mount included -Constructed of aerospace grade extruded carbon...
See More >>

Dell'Arte STIMER Yves-Guen

$450
Finally, thanks to Christian Yves Guen, the re-issue of the legendary Stimer ST-51 is here!! Created in 1951by Yves Guen under the brand name Stimer, this pickup was first used by Django Reinhardt and became popular among the Manouche jazz players such as Maurice Ferre (aka Gros Chien) Joseph Pouville (aka Babagne) Paul Tchan Tchou Vidal, Patrick Saussois and scores of others. This pickup is...
See More >>

Dell'Arte Tuning heads for slotted peghead guitars

$69
3 on plate high quality guitar tuning head. Very handsome antique gold finish, ebony buttons. 1:15 ratio for fine tuning with minimum friction. Sold with 12 bushings and screws
See More >>

Dell'Arte Stimer Yves Guen ST-48

$375
Stimer ST-48 re-issue by Christian Yves Guen, the son of the original maker of the legendary pickups. Used throughout the fifties and the sixties by countless of Manouche players starting with Django Reinhardt himself, these pickups have defined the sound of the genre for this era. I've included the documentary (narrated by Christian Yves Guen) so you can hear Django playing through one of these
See More >>

Dell'Arte Miller Shortened bushing for Miller tuning heads

$21
Miller shortened bushings (4mm) for the outside of a slotted peghead guitar with Schaller type. Will fit a 10mm diameter hole. The seventh bushing on the right is there to show the difference in size with a regular size bushing
See More >>

Dell'Arte Miller Tuners for Gypsy style guitar Model 203

$310
Made in Switzerland by Rainer Muller to the most exacting specifications. Rainer uses the Schaller gears in his tuners, 1/14 ratio. Great looking tuners of high quality for Selmer-Maccaferri type guitars Be aware that these tuners using the Schaller gears, the outside holes on the headstock need to be resized to 10mm (the inside hole stays the same) Not a difficult task, I have done it with with...
See More >>

Dell'Arte Tuning heads for classical guitar

$59
High quality classical tuning heads 1-16 ratio. 35mm spacing between posts, 10mm posts diameter
See More >>